Leaks are expensive. They can crack foundations, rot ceilings, rust pipes and destroy woodwork. Worse yet, water damage can plague you for years if you don’t catch it early and make the necessary repairs quickly. If you suspect a leak, watch and listen for water running after you’ve turned off the water supply or sprinkler systems.

If it gets complicated to identify the leakage, Robinson Restoration serving all of Vancouver, WA, has specialists on-site to inspect your yard and pinpoint the source of your Leak. Read on to learn how to find the source of a water leak in your front yard.

Check Service Line

The service line is the pipe that connects your water heater to the drain. It’s a huge, long system that runs from the hot water tank through your house to the sewer or septic tank.

A leak in this line can cause serious damage to your home and its contents; it’s essential to keep an eye out for any potential leaks. Knowing how to check whether or not the water is coming from your service line is necessary. The first thing you’ll need to do is find out where the water is leaking from. To do this:

Shut off Valve

Shut off the main water valve, then listen for any noise from your pipes. If vibration or low-level noise comes from your pipes, that is likely because your main water line has broken somewhere and is leaking. To find the source of this Leak, call a professional plumber as soon as possible.

Read  Your Water Meter

If you have a water leak in your front yard, you may be concerned about the source of it. You can do several things to find the source of your Leak. You should first check your water meter by opening it with a screwdriver and searching for a leak detector. It’s a blue or red triangle. If it’s spinning, it means that water is flowing. Therefore, there is a leak in the service line

If there’s no leak detector, then the next thing you should do is call the city’s customer service center so that they can send someone out to inspect your meter. If there is a leak in your meter, there’s probably an internal problem with it, and it will need to be fixed by a professional. 

Locate the Leak

You should be able to see where the water is coming from your system, and you’ll want to ensure that this is not just a dripping faucet somewhere in the house.

If there is leakage in the front yard, it’s essential to find the water source so you can stop it. You can look for wet spots, puddles, or even standing water. 

If you cannot locate the source of the Leak, then you will have to hire someone who can help you locate it. You can do this through an on-site visit or by sending them pictures of your plumbing lines. 

Possible Places for Leaks In the Service Line

The shutoff valve connection and fittings are the most likely places to find leaks in your service line:

  • Shutoff valve connection:  The pipe is of copper. The most probable place where there is a leak is leakage, where there is a connection between PVC and copper. Contact a plumber immediately if you notice any leaks around this area.
  • Fittings: These fittings connect one part of your service line with another. If they leak, they can also cause problems with corrosion on other parts of your system. 

Check Water Leaks In Irrigation System

It is necessary to turn off the main shutoff valve first before turning on the irrigation shutoff valve if the irrigation system is linked below or before it. Also, open the irrigation system shutoff valve if it is situated above or after the house’s main water shutoff valve to prevent water from entering the house. Do not flush the toilet or take a shower during this test.

Check the water meter to see if it’s registering any flow. A leak through the irrigation system is the cause of any water flowing through the water meter.

The leaks are either in the valve box or the backflow preventer. Observe the ground around the active area for a huge amount of water flowing up from the ground. This water could be the result of a sprinkler head that has broken.

It’s not easy to fix a leak. Digging up and replacing a pipe segment is the most common method. If you don’t know where to start digging, call a professional to find the source of the air leak, a licensed plumber will utilize specialized equipment to pump air into your service line.

Check Sewer Line Leaks

You will notice a foul stench or water coming up through the floor. Sewer line leaks are a big problem for homeowners and businesses. Sewer line leaks get caused by cracks in the sewer system that can cause sewage to leak into your home, basement, or garage. 

Sewer line leaks can also cause damage to your house’s foundation as well as your plumbing system. Sewer line leaks are located at the end of your main drain line that leads to your sewer main under the street.

If you want to know the exact place, pour the dye into the toilet, and then flush it, wait for 30 mins. Call a plumber if you see water that has to dye in the front yard.

Whether you have an occasional leak or a serious potential plumbing problem, these tips should help you find the source of your Leak. You may find everything is in order once you isolate the problem, or you may need to schedule some professional plumbing services. Either way, you’ll be able to get on top of things before they get out of control. The most important thing is to deal with water leaks as they appear. They can cause problems in your landscaping, foundation, and inner walls, potentially resulting in a more significant issue.

By Manali